bathroom black porcelain wall or ceiling light - Ø 12cm

Name: bathroom black porcelain wall or ceiling light - Ø 12cm bathroom black porcelain wall or ceiling light - Ø 12cm
Availability: InStock

light.o.068.b

€118.50

ZANGRA SAYS TECHNICAL DESCRIPTION

Minimalist porcelain lamp

This timelessly elegant lamp can be used as a wall or ceiling light and will look great in any room of the house. It can also be used outdoors, under cover.
This lamp is manufactured in a century old European factory and combines the quality and durability of porcelain with the velvety shine of opal glass.
Its low height makes it an ideal ceiling light for low ceilings or where flush mounting is not possible or not desired.
This lamp has a GX53 socket and must be fitted with a GX53 bulb. This model is available in white porcelain.

The story behind zangra's porcelain

Soon after being established in 2009, zangra started to successfully cooperate with different porcelain factories all over the world – a cooperation that continues to this day. In recent years, zangra has spent a lot of time in world’s most famous porcelain cities. From Limoges in France to Jingdezhen in China, zangra was able to work at legendary porcelain factories. So in cooperation with the staff zangra created new models and rediscovered old forgotten molds. A number of old molds were put back in production making new pieces. zangra’s porcelain is still produced by hand, piece by piece. This makes each piece unique. zangra's work proved successful with their products being sold all over the world.

What does the IP value mean on a light fitting?

All light fittings are classified according to their IP value. These IP values (International Protection or Ingress Protection) indicate the degree of protection of the light fitting against dust and moisture. The IP value consists of two digits: the first digit indicates the level of protection against dust; the second, the level of protection against moisture. The higher the IP value, the higher the protection. Check this diagram to see the different existing IP values.

What does IP40 mean?

IP40 means that this lamp is:
4 : protected against a solid object greater than 1mm.
0 : not protected against water.
Indoor: rated for installation in bathroom zone 3.
Outdoor: not suitable for use (see zone diagrams in the gallery).
See our damp-rated lights for bathroom section for more information.

Is the light bulb included?

The light bulb is not included when you buy this light. You will find here the whole selection of LED, incandescent, stick and halogen light bulbs. Take into account that each light needs a specific type of light bulb. You will find the kind of light bulb that it requires under the "Technical Description" tab.

Are the screws included?
No screws are supplied, as the type of screw depends on the material of the wall or ceiling (concrete, brick, plasterboard, wood).
You need a different type of screws depending on each material.

Do not use an electrical screwdriver
Do not use electrical screwdrivers when installing ceramic or porcelain items. We recommend to first drill a hole in the wall, fit the right plugs inside and use a manual screwdriver to fix the screws in place. Be especially careful during the final tightening of the screws.

What is a GX53 LED bulb?

The GX53 LED bulb is a round, flat light source and has a special fitting with two metal pins. There is a distance of 53 mm between these pins (hence the name). Due to its flat design, this bulb is often used as a light source in a cabinet or spotlight.
Installing our GX53 LED bulb is simple and quick. Thanks to the bayonet fitting, the bulb is held firmly in place with a simple right-hand turn. Replacing it is just as effortless: turn the bulb anti-clockwise to remove it from the fitting, insert the new bulb and turn clockwise until it is firmly in place.

Code	light.o.068.b
EAN code	5415249032586
Material	Porcelain
Height	6,5 cm
Diameter	Ø 12 cm
Origin	Europe
Marking	CE
Lamp holder type	GX53
Wattage	max 9 W LED
Voltage	AC 230 V
Frequency	~ 50/60 Hz
Protection marking	IP40
Safety class	Class 2
Interaxial distance	7 cm
Connection	Backside
Assembly instructions
Protection's indice